Antifreeze Thermostat FS20, 0/+15C

TWO-PHASE FROST PROTECTION THERMOSTATS FS-20-UW Electronic frost protection thermostat or frost monitor with switching relay output, continuous temperature and valve output (summation output 0–10 V) and control and cascading output (0–10 V), optionally with connection for a heating element. A IP65 resistant plastic housing with display with the actual temperature, measuring range, overrange/underrange of the set switch point (frost protection temperature) and alarm indicator for “frost” or “error” (capillary breakage, overvoltage/undervoltage), quick-locking screws and a fully active sensor rod made of copper. The delivery scope includes a set of MK-05-K mounting clamps for expert attachment of the sensor rod. Measuring range: 0…+15 °C / 32…+59 °F Accuracy: typical ± 1 K (at +10 °C) Sensor type: 3m Copper rod active along the entire sensor length, min. response length of 25 cm Input: 1 x 0 -10 V control input DDC 1 x 0 -10 V output valve (frost signal with control voltage and cascading) 1 x potential-free changeover contact (24 V), range of adjustment 0…+ 15 °C Current consumption: max. 100 mA at 24 V DC Load resistance: RL > 50 kOhm Ambient temperature: –15…+50 °C / 5…+122 °F (Housing) –20…+60 °C / -4…+140 °F Sensor and capillary tube > 20 cm from the housing. Power: 24VAC/DC (± 10%) 24DC <2,4W T2-IP65 plastic housing with three-line display 70x40 mm (WxH), a M16 cable glands and MK-05-K mounting clamps. Housing dimensions: 126 x 90 x 50 mm / 4.96 x 3.54 x 1.97 in